| Author |
Message |
Andy
Friend of the Board


Joined: Jun 27, 2003
Posts: 787
Location: Adelaide, Austraila
|
Posted:
Mon Aug 14, 2006 4:53 pm |
|
I only noticed this tonight. The red frame is from a 900 and the other is from an 1100.
My question is, what the |
| |
|
|
 |
TomStrasser
Red CB1100F


Joined: Jul 02, 2005
Posts: 12129
Location: Metro Detroiters I live at Square lake & Woodward to everone else Bloomfield Hills (Detroit) Mic
|
Posted:
Mon Aug 14, 2006 8:19 pm |
|
can't remember cause I haven't had it on in years but could it be for the center stand spring? |
_________________ In life You are either Qualified or your Dinq, If you have to ask your Dinq |
|
|
 |
CB900SS
Red CB1100F


Joined: Jun 08, 2005
Posts: 5476
Location: Mastic, NY
|
Posted:
Mon Aug 14, 2006 9:33 pm |
|
| TomStrasser wrote: |
| can't remember cause I haven't had it on in years but could it be for the center stand spring? |
That was my first thought also, if you want I will look at my bike and check. But that wont be for a few days because I wont have access to it. So if someone else reads this and has there bike 10 feet away and can look that would be a nice thing to do. |
| |
|
|
 |
1981CB
Black CB750F


Joined: Dec 09, 2005
Posts: 982
Location: Bundaberg, QLD, Australia
|
Posted:
Mon Aug 14, 2006 9:43 pm |
|
The centre stand spring conects on the other side via a pivoting arm thingamybob. I have no idea what its for . Haha guess I'm gonna have the same problem hey Andy ,
Thanks for getting the 1100f frame for me Andy, I appreciate it.
Talk to you later |
| |
|
|
 |
Andy
Friend of the Board


Joined: Jun 27, 2003
Posts: 787
Location: Adelaide, Austraila
|
Posted:
Tue Aug 15, 2006 8:43 am |
|
My pleasure on the 1100F frame Mark, It's always good to help put a fellow "F"er and anyway, when mines finished, I'll be riding up to share a beer with ya!
As for this frame "thing" - it not for a stand or anything else I can think of ... unless they keep the extra horse power here?
Maybe it's for warding off those right 'orible blue carpet tiles  |
| |
|
|
 |
motnick
Black CB900F


Joined: May 05, 2004
Posts: 1658
Location: Wyandotte (Detroit) Mi.
|
Posted:
Tue Aug 15, 2006 12:32 pm |
|
It is a spacer for the engine. If you clean it off it will have a number on it. I think the number represents the size or thickness of it. I was a little confused on which one to use when I swapped frames out. One was a lot thicker than the other. Cant remember which one I ended up using. I think it talks about it some in the FSM. |
| |
|
|
 |
Ratfink
Red CB1100F


Joined: Nov 18, 2004
Posts: 7994
Location: Tempe, AZ
|
Posted:
Tue Aug 15, 2006 1:43 pm |
|
| motnick wrote: |
| It is a spacer for the engine. If you clean it off it will have a number on it. I think the number represents the size or thickness of it. I was a little confused on which one to use when I swapped frames out. One was a lot thicker than the other. Cant remember which one I ended up using. I think it talks about it some in the FSM. |
I think he is right.
But I like the idea that it wards off evil Carpet Tiles.
We need something to help against the carpets tiles. They grow in numbers every day.  |
| |
|
|
 |
Andy
Friend of the Board


Joined: Jun 27, 2003
Posts: 787
Location: Adelaide, Austraila
|
Posted:
Tue Aug 15, 2006 3:01 pm |
|
| motnick wrote: |
| It is a spacer for the engine. If you clean it off it will have a number on it. I think the number represents the size or thickness of it. I was a little confused on which one to use when I swapped frames out. One was a lot thicker than the other. Cant remember which one I ended up using. I think it talks about it some in the FSM. |
Now I'm really lost, what's it a spacer for?
Why would the 1100 need it but not the 900 / 750?
and you'll love how dumb I am on this one - what's FSM? |
| |
|
|
 |
TomStrasser
Red CB1100F


Joined: Jul 02, 2005
Posts: 12129
Location: Metro Detroiters I live at Square lake & Woodward to everone else Bloomfield Hills (Detroit) Mic
|
Posted:
Tue Aug 15, 2006 3:12 pm |
|
FSM (F@#k'n Service Manual) |
_________________ In life You are either Qualified or your Dinq, If you have to ask your Dinq |
|
|
 |
1981CB
Black CB750F


Joined: Dec 09, 2005
Posts: 982
Location: Bundaberg, QLD, Australia
|
Posted:
Tue Aug 15, 2006 9:18 pm |
|
Maybe it needs the spacer to stop the motor rocking backward due to the rubber mounted motor, which the 7 and 9 dont have? Under acceleration there would be a fair amount of force pulling back against the rubber mounts .
Therefore Andy you are right! ....... it does hold the extra horse power!
Now all I wanna know is how to make more so I can jam it in there
| Quote: |
| My pleasure on the 1100F frame Mark, It's always good to help put a fellow "F"er and anyway, when mines finished, I'll be riding up to share a beer with ya! |
Sounds like a good idea, I'll look forward to it Andy  |
| |
|
|
 |
CB900SS
Red CB1100F


Joined: Jun 08, 2005
Posts: 5476
Location: Mastic, NY
|
Posted:
Tue Aug 15, 2006 9:46 pm |
|
| 1981CB wrote: |
Maybe it needs the spacer to stop the motor rocking backward due to the rubber mounted motor, which the 7 and 9 dont have?
|
My 900 is rubber mounted. |
| |
|
|
 |
AMC49
Black CB900F


Joined: Jul 30, 2003
Posts: 1828
Location: Fort Worth, TX.
|
Posted:
Wed Aug 16, 2006 2:51 am |
|
1100 would need it for higher torque output than 900, probably keeps chain proper. My question is, does 1100 case have a boss or extra thickness here to take a load? |
| |
|
|
 |
CowTownBiomed
Red CB1100F


Joined: Apr 02, 2004
Posts: 7542
Location: Calgary Alberta Canada
|
Posted:
Wed Aug 16, 2006 3:29 am |
|
| Cb900SS wrote: |
| 1981CB wrote: |
Maybe it needs the spacer to stop the motor rocking backward due to the rubber mounted motor, which the 7 and 9 dont have?
|
My 900 is rubber mounted. |
So is mine, my 1100 is the same I'm sure.
Making a solid engine mount kit was one of the projects Matt@PSB did'nt get a chance to finish. |
| |
|
|
 |
lj
Silver CB750F


Joined: May 05, 2005
Posts: 724
Location: Tucson,AZ
|
Posted:
Wed Aug 16, 2006 7:22 pm |
|
One wonders why, in the partsfische, it was available in thicknesses from .5 to 2.5. According to Bikebandit, its NLA, but who knows.
When I first saw this post, I just naturally assumed that this piece was the Right Side Johnson Rod stopper, but then I realized that only the early models with the reverse zloenstift compensator would need such a thing. |
| |
|
|
 |
CowTownBiomed
Red CB1100F


Joined: Apr 02, 2004
Posts: 7542
Location: Calgary Alberta Canada
|
Posted:
Wed Aug 16, 2006 9:24 pm |
|
| lj wrote: |
| reverse zloenstift compensator |
Bet'cha cant say that 10 times fast,
But now that I think of it I dont think I've ever seen one.
What do they look like? |
| |
|
|
 |
Irimajiri
Twinstar


Joined: Mar 19, 2004
Posts: 236
Location: Yokohama
|
Posted:
Wed Aug 16, 2006 10:13 pm |
|
Stopper that prohibits main stand from hyperextension. |
| |
|
|
 |
freebaggin101
Twinstar


Joined: Dec 04, 2004
Posts: 128
Location: where women glow and men chunder
|
Posted:
Thu Aug 17, 2006 7:50 am |
|
| Andy wrote: |
I only noticed this tonight. The red frame is from a 900 and the other is from an 1100.
My question is, what the |
| |
|
|
 |
AMC49
Black CB900F


Joined: Jul 30, 2003
Posts: 1828
Location: Fort Worth, TX.
|
Posted:
Fri Aug 18, 2006 3:13 pm |
|
My thoughts exactly. Seems like there were a couple of shims listed in parts that could be slipped in to make motor butt against that plate, someone correct me?? |
| |
|
|
 |
crewchiefuh1h
Twinstar


Joined: Nov 09, 2005
Posts: 124
Location: Cisco, Texas
|
Posted:
Fri Aug 18, 2006 11:10 pm |
|
| AMC49 wrote: |
| My thoughts exactly. Seems like there were a couple of shims listed in parts that could be slipped in to make motor butt against that plate, someone correct me?? |
I had to finally go look at BikeBandit...and yes, it looks like there are a couple of shims that hang on there.....I'm going to guess something different on this. Rather than it being something to stop torque from twisting the motot back.....it may be to keep the chain from pulling the motor to the left when power is first applied to the chain. By getting the motor out of line to the left it can put pressure on the bearing of the output shaft ?? and cause it to elongate the motor housing where it fits...as it would constantly be trying to twist the bearing sideways if the motor could be pulled to the left when power is applied.
That's just my guess |
| |
|
|
 |
freebaggin101
Twinstar


Joined: Dec 04, 2004
Posts: 128
Location: where women glow and men chunder
|
Posted:
Fri Aug 18, 2006 11:27 pm |
|
wait, i've just had an email from the HRC office in Japan... they inform me its actually the secret location to hide your bike key when you go to the beach for a swim.
think about it, everybody knows most people put their keys in their shoes... good ol' Mr Honda eh'? always one step ahead (or beyond)
and they want me to take back my discourtious coments about 1100F engines being "jelly mounted"... the rubber (or donut*) mounts were of course a brilliant idea. typical of Honda's forward thinking approch to making simple ideas overly or unnesasarily complicated. i mean didn't every bike adopt this inovation eventually ?? or not ??
*Honda patient applies to this term and all likeness in this aplication |
| |
|
|
 |
|
|
|
View next topic
View previous topic
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
Powered by phpBB © 2001-2008 phpBB Group
:: Theme & Graphics by Daz :: Ported for PHP-Nuke by nukemods.com ::
All times are GMT
|