Search found 623 matches

Sending you positive thoughts for a speedy recovery, Nick.

Ok, I just saw this, but I have to say. I went to lithium ten years back. I'm still using the same battery even though it's showing its age. I will never go back to lead acid, the lithiums are so much ...

I've never had to replace the O rings. In any case, you can measure them and find replacement from any industrial supply.

Good to have new bushings on hand when you have the forks apart, but if the oils been changed regularly, you may find you don't need them. Last time I checked, admittedly some time ago, they were sti ...

The caliper paint is rated to 900f, that should cover it for the headers.Cliff.

Ya, those pipes will easly burn off 900 degree paint. Even the 2000 degree paint doesn't hold up that well.

If you have the stock OEM ignitor boxes and the plastic
melts out them, Mike Nixon told me it's from trying to start
the bike with a very low battery that overheats the boxes

Those boxes, the ear ...

I stopped selling stuff on eBay years ago - fees are just way to expensive - which significantly limits the buyers. Craigslist, even with it's limited buyers, typically still leaves more money in my ...

I'm pretty sure it's been stated many times that the head may have to be milled or the base gasket removed, or whatever, to allow for more slack.

I suggested on Facebook that fitment of the V&am ...

The front guide matches the tensioner curve in these tensioners. As long as the markings line up, crank TDC, cam marks, everything should be fine.

The amount chain 'slack' taken up by the tensioner ...

I've never had my hands on one of the curved tensioners but pushing in on the chain would indeed advance the valve timing. However, the 'push' from the curved guide seems to be pretty minimal and I'm ...

If it was 35 years ago, it might have been me Laughing

Thanks Gene. I Got fixed up. Very Happy

Tried to change my password but when I open the profile page I get a popup with nothing it it, then on the profile pages I can't add text to any of the fields. Tried to log into the site using a coup ...

I have 3 candidates waiting for a viable gloss black exhaust finish but they will all be on riders so it has to hold up to the heat. Can't wait to hear how this turns out. Fingers Crossed.

I like quiet motorcycles; I prefer no-one knows how small my dick is.

For me, there just something about those 650's that look so good - I think Honda got the proportions just right. A buddy's wife has a mint one and it looks great going down the road.

Wife or the ...

For me, there just something about those 650's that look so good - I think Honda got the proportions just right. A buddy's wife has a mint one and it looks great going down the road.

Try Palmolive, softens your hands while you pull the bulbs.

I see what you did there. ... Laughing

My fingers hurt for a month after I pulled mine out - very frustrating job. I used lots of silicone on them when they went back in but hopefully I'll never have to pull them again.

In addition to what others have said, keep in mind that Simple Green will strip metal finish, i.e. zinc and cad plating, off if left on long enough. Probably not an issue for cleaning an engine but b ...

Am considering this myself. Found these yesterday which may interest you:

[url=https://youtu.be/KLo19mDKvls]https://youtu.be/KLo19mDKvls

[url=https://youtu.be/oC63WyaoXN0]https://youtu.be/oC63W ...

This is what you get when you buy one of mine.

So every start clutch comes with a free Digital Micrometer? I'm in! Twisted Evil

With the way eBay has gone in the last few years, I'm shocked the shipping charges aren't $200.

Could have sworn he was feeling good.

RIP. Sad

Probably none otherwise somebody would have done it. Maybe more low end torque?

What got me thinking of this was reading somewhere that someone made new cams for a parallel twin to turn it into a 'Twingle' (I know - not a real twingle).